Moving a two-drum Risograph: Difference between revisions
Robertbaxter (talk | contribs) No edit summary |
Robertbaxter (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
|tools=Phillips #2 screwdriver, Tape | |tools=Phillips #2 screwdriver, Tape | ||
}} | }} | ||
A two-drum machine weighs roughly 370 lbs (168 kg)<ref>Riso Kagaku Corporation. "MZ/MV 7/9 Series Technical Manual." Revision 1.0. 2008 | A two-drum machine weighs roughly 370 lbs (168 kg)<ref>Riso Kagaku Corporation (Overseas Technical Department). "[https://archive.org/details/RisoMZSeriesTech/MZ7_MV7_MZ9_TECHNICAL_MANUAL/ MZ/MV 7/9 Series Technical Manual]." Revision 1.0. 2008.</ref>—this guide goes over some best practices and options for moving them. | ||
{{references}} | {{references}} | ||
Revision as of 14:54, 7 August 2025
| Moving a two-drum Risograph | |
|---|---|
| Difficulty | Beginner |
| Duration | 20 minutes (prep) |
| For series | MDMEMFMHMV |
| Tools | Phillips #2 screwdriver Tape |
A two-drum machine weighs roughly 370 lbs (168 kg)[1]—this guide goes over some best practices and options for moving them.
References
- ↑ Riso Kagaku Corporation (Overseas Technical Department). "MZ/MV 7/9 Series Technical Manual." Revision 1.0. 2008.